Skip to main content
Ironclad Commercial Floors logo
Commercial Epoxy Flooring in Vancouver, BC by Ironclad Commercial Floors

Concrete & Epoxy

Commercial Epoxy Flooring in Vancouver, BC

Ironclad Commercial Floors provides commercial Epoxy Flooring in Vancouver, BC and across Metro Vancouver. Seamless, chemical-resistant epoxy systems for plants, labs, shops and back-of-house areas that need a tough, easy-clean floor.

Overview

Seamless epoxy floors engineered for commercial punishment

Commercial epoxy creates a monolithic, non-porous surface that resists oil, chemicals and impact while staying easy to clean. We diamond-grind every slab, repair cracks and joints, then build the system to the thickness your traffic demands — from thin-film coatings to trowelled mortar systems.

Chemical resistance

Stands up to oils, cleaners, mild acids and constant washdowns.

Seamless & hygienic

No grout lines or seams for dirt and bacteria to collect in.

High impact strength

Handles carts, pallet jacks and dropped tools without chipping.

Brighter spaces

High-gloss finishes reflect light and make facilities feel cleaner.

Commercial Epoxy Flooring in Vancouver, BC

Commercial epoxy flooring in Vancouver has to cope with wet winters, tracked-in grit and tight production schedules. We coat food-processing rooms along Marine Drive, brewery floors in Mount Pleasant and lab suites near UBC, choosing broadcast, self-levelling or mortar systems by load and washdown routine. Every Vancouver epoxy job starts with moisture testing, because a coating is only as sound as the slab beneath it.

For commercial epoxy flooring as part of a bigger project, see our commercial flooring installation in Vancouver or our commercial flooring repair in Vancouver.

Our Process

Commercial Epoxy Flooring: our process

  1. 01

    Slab testing

    We test moisture, hardness and contamination so your commercial epoxy flooring in Vancouver starts on a slab that will hold the coating.

  2. 02

    Shot-blast or grind

    Diamond grinding or shot-blasting opens the pores of the concrete and removes sealers, oils and laitance for a deep mechanical bond.

  3. 03

    Fill and prime

    Cracks and joints are repaired, then a penetrating epoxy primer locks into the slab before any body coat goes down.

  4. 04

    Build and cure

    Body and top coats are applied to specification, then cured and inspected so your facility can return to service on schedule.

FAQ

Commercial Epoxy Flooring in Vancouver FAQs

With proper grinding and the right system thickness, commercial epoxy commonly lasts 10+ years; a fresh top coat can extend it further. Get a free commercial epoxy flooring quote in Vancouver.

Service Areas

Commercial Epoxy Flooring across Metro Vancouver

Free on-site estimate

Need commercial epoxy flooring in Vancouver?

Tell us about your commercial epoxy flooring project in Vancouver, BC — we will measure, test the substrate and send a clear, itemized quote.

Read our reviews on